News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

Basic information of servo feeder


Release time:

2024-02-04

Author:

Source:

Science and technology is more and more developed, we use more and more equipment in production, the function is also very complete. Next, we will introduce the basic information of the servo feeder.

Science and technology is more and more developed, we use more and more equipment in production, the function is also very complete. Next, we will introduce to youServo feederThe basic information.

Servo feeder can also be seen in many places. Of course, its role and advantages are more. The servo feeder can meet the various requirements of the stamping process, especially suitable for processing products with high precision requirements, and overcomes the defects of large punch vibration, unstable precision, short die life and so on. Of course, as mechanical equipment, there are many things to pay attention to when using it. First of all, the safety zone mark or safety fence shall be set around the servo feeder, and non-operators shall not enter without permission. In addition to the places you see, you should pay attention to them. It is also necessary to confirm that there are no personnel and items that hinder the operation of the machine in the safe area before starting up. And here also suggest that you before the boot, be sure to remove all the sundries on the workbench and the moving parts. Of course, it is not allowed to press severely rusted plates or hot-rolled plates with severe oxide scale, and it is strictly forbidden to process plates with serious burrs on the edges or surrounding plates.

Servo feeder actually needs to know a lot of relevant information when it is in use. For example, the servo feeder can process metal or non-metal sheets with a plate thickness of 6mm or less that will not pollute the machine tool, and its flatness should be less than 5mm. The processing of hot-rolled steel plates must be leveled in advance. It is recommended that everyone must pay attention to the cleaning of rusted and oily plates during operation. Otherwise, it will affect the quality of the workpiece and the life of the machine. Therefore, during operation, we suggest that the small plate can be clamped by two clamps. In order to ensure the accuracy of the workpiece, the straightness of one side of the plate clamped by the clamps is better, and the verticality of the two positioning sides is better. The specific requirements depend on the requirements for the workpiece. Of course, in the use of good will encounter some problems. For example, it cannot be started. The reason for it: the power is not connected. Countermeasures: check whether the power supply is connected. There is one more common. That is its servo feeder pressure is insufficient. In fact, the reason for this is that its hydraulic oil is insufficient; whether the motor is working properly; the filter screen is blocked; the sealing ring is damaged.