News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

What are the advantages of NC servo feeder compared to roller feeder


Release time:

2024-02-04

Author:

Source:

Among the many feeder equipment, there are many types of equipment that are very common in the industrial field, such as NC servo feeders and roller feeders. Many customers have different views on the two types of feeders, and most customers prefer servo feeders to drum feeders. Next, analyze why NC servo feeder is better than roller feeder, what are its advantages?

Among the many feeder equipment, there are many types of equipment that are very common in the industrial field, such as NCServo feederand drum feeder. Many customers have different views on the two types of feeders, and most customers prefer servo feeders to drum feeders. Next, analyze why NC servo feeder is better than roller feeder, what are its advantages?

1.NC servo feeder has advantages over the feeding range of roller feeder

When customers choose a feeder, they usually choose according to their own stamping equipment requirements, and the scope of application of roller feeders is relatively small, and generally only suitable for punching machines with output shafts. In addition, they also have special requirements for the width of the material and the feeding step. For example, when the feeding is greater than 500 mm or the step is greater than 300mm, the requirements of the feeder cannot be met, but the NC feeder is different from the servo feeder, and the NC servo feeder can be matched with all punching machines. The feeder has no restrictions on the feeding width requirements, and can be customized according to the production requirements of the punch, which is suitable for punch processing and is widely used.

2.NC servo feeder is easier to operate than drum feeder

The NC servo feeder is operated by PLC control system, servo motor and digital touch screen. It is easy to operate on the screen when setting the step distance of the feeder and adjusting the parameters. However, the roller feeder adopts mechanical transmission control transmission feeding, which requires complex adjustment steps and high professional requirements for operators.

Although the NC servo feeder has more advantages than the drum feeder, the drum feeder has a simple structure, does not use electronic components such as motors and servo controls, and is much cheaper. But the NC servo feeder adopts imported servo control system, servo motor, etc. However, in the long run, NC servo feeder is more suitable for the long-term development needs of enterprises due to its stable feeding accuracy and low labor cost. Therefore, how the customer chooses the feeder also depends on the actual demand.