News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

How to eliminate the running error of servo feeder?


Release time:

2024-02-04

Author:

Source:

Servo feeder is commonly used in various punch feeding equipment. In addition, imported PLC control and loose servo motor drive accuracy is higher than mechanical equipment, the actual operation is more convenient. So how to understand the manufacturers gradually increase the servo feeder error?

  Servo feederIs a variety of punch feeding equipment commonly used in the feeder. In addition, imported PLC control and loose servo motor drive accuracy is higher than mechanical equipment, the actual operation is more convenient. So how to understand the manufacturers gradually increase the servo feeder error?

Whether the servo feeder can achieve today's performance is also the result of gradual improvement and adjustment by the product R & D and design department according to the structural characteristics and existing problems of the servo feeder. For example, if it is a thick plate material, the arc between the material machine and the straightening machine will be very long. In addition, due to the thickness of the raw material servo feeder, the gravity of the raw material is very large, coupled with the gravity of the traction belt, the gravity of the feeding roller in the operation link, and the raw material caused by the inaccuracy of the servo feeder, these defects have a great impact. Many users often have feedback and suggestions on the feeding errors of the users in the stamping process.

In order to solveServo feederFor these problems, the servo feeder manufacturer has made some improvements, such as installing a floating joint at the connection between the drum and the power board of the servo feeder. The power unit changes the original rigid fixed connection to the existing flexible connection, which can enhance the original mechanical properties of the feeder, make the servo feeder connection more stable, and not easy to cause blockage or non-parallel due to non-vertical, resulting in inaccurate servo feeder.

In addition, inServo feederTwo feed unidirectional pinch wheels are installed next to the feed inlet. The feed non-return pinch wheel can only rotate forward, not backward. A door handle is installed on one side of the upper feeding one-way pressure feeding wheel. When loading and feeding, press down the door handle, and the upper feeding non-return pinch wheel can be lifted up. During normal operation, the upper and lower feeding one-way pinch rollers clamp the raw materials, so that the raw materials can only move forward, not backward.

On the basis of the above improvements, a one-way pinch wheel is added to the servo feeder, which solves the problem of raw material gravity lag and improves the error of the servo feeder. The above is the commonly used method to eliminate the running error of the servo feeder.