News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

Stamping machinery tells the phenomenon of material slippage of servo feeder?


Release time:

2024-02-04

Author:

Source:

When the feeding speed of the servo feeder can be met, the distance between it and the straightening machine or the material rack should be shortened as much as possible to reduce the waiting area, thereby reducing the weight of the material in the waiting area and reducing its load, and preventing The material in the waiting area of the pressure servo feeder is overweight and slipping.

PunchServo feederIt is a commonly used material conveyor in the stamping industry, which is conducive to improving the production efficiency of enterprises and saving labor costs for enterprises. With the widespread use of machines, we will encounter some problems more or less in actual use. For example: punch servo feeder material slip. From the perspective of the industry, this is a relatively troublesome problem, because material slippage will cause a series of problems such as material not being delivered to the position, inaccurate position, and unqualified mold forming parts. So, how should we deal with the phenomenon of machine material slipping? The following is a simple understanding of the stamping machinery Xiaobian to see it!
1. What we have to do is to find out the cause of the problem and check the cylinder management problem of the pneumatic device of the servo feeder. When the air pressure is insufficient or the air pipe is insufficient, the air pressure is low, and the pressure spring is insufficient when clamping the material. If the material is too thick, it is easy to slide the material if it is not clamped tightly. At this time, another air tube must be connected to the cylinder on the solenoid valve so that the cylinder has thrust to clamp the roller on the servo feeder more tightly. It will not slip, and can also be achieved by increasing the intake pressure to increase the cylinder pressure.
2. When the feeding speed of the servo feeder can be met, shorten the distance between it and the straightening machine or the material rack as much as possible to reduce the waiting area, thereby reducing the weight of the material in the waiting area and reducing its load. Prevent excessive weight and slippage of the material in the waiting area of the pressure servo feeder.
3. Check whether the power spring of the feeding leveling roller is qualified and whether the rebound strength can meet the requirements. If the requirements cannot be met, a new spring needs to be replaced to increase the pressure.
The above is the stamping machinery Xiaobian introductionServo feederYou can learn more about the introduction of how to deal with material slippage.