News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

How does the high-speed precision punch work? Do you want to know?


Release time:

2024-02-04

Author:

Source:

How does the high-speed precision punch work? Do you want to know? The upper die of the high-speed precision punch is the upper part of the whole set, which is installed on the die part of the slider. The upper die seat is the upper plate part of the upper die, and the workpiece and the pressing block are connected together and fixed with the pressing block slider. The lower mold is the next part of the whole set and is installed on the table of the press. The mold base is the lower surface of the lower template, which is directly fixed on the workbench or flat plate. The cut edge is the side wall of the edge of the die. The inclination angle of the cutting edge is that of each bevel of the punching die hole. Air cushion is to high-speed punch compressed air as the main power of the top device.

How does the high-speed precision punch work? Do you want to know?

15996339737525.jpg

The upper die of the high-speed precision punch is the upper part of the whole set, which is installed on the die part of the slider. The upper die seat is the upper plate part of the upper die, and the workpiece and the pressing block are connected together and fixed with the pressing block slider. The lower mold is the next part of the whole set and is installed on the table of the press. The mold base is the lower surface of the lower template, which is directly fixed on the workbench or flat plate. The cut edge is the side wall of the edge of the die. The inclination angle of the cutting edge is that of each bevel of the punching die hole. Air cushion is to high-speed punch compressed air as the main power of the top device.

The high-speed precision punch guide sleeve is a precise guide device for the relative movement of the upper and lower dies of tubular parts. Most of them are matched with the guide posts fixed on the upper and lower die seats. It must be ensured that the punch and the die are aligned, guided and unloaded (parts) so that the plate-like part fits accurately in the punch. The guide post is a cylindrical part, which provides accurate guidance for the relative movement of the upper and lower dies. Most of them are fixed on the lower die base and matched with the guide sleeve of the upper die base. The guide pin is guided to the pin-shaped portion of the female die position in the material hole. This guide rail is used to guide the mold of the mold, when used to guide the punch out of the mold. The guide plate guide part of the guide plate (belt and roller) is a female die. The column sleeve is a guide rod, and the guide sleeve is arranged between the sliding dies.

The stamping die of the high-speed precision punch is installed in the stamping process of the press and the production process of equipment accessories, and is composed of upper and lower parts. The punch is a convex workpiece, directly through the punch. A female die is a concave working part formed directly by stamping and punching. The spare parts protection board is a board that prevents fingers or foreign objects from entering the dangerous area of the stamping die. The pressing plate (ring) is the overflow component of the stamping material or the process control material of the stamping die. It is the most well-known adhesive in the drawing die and the pressing plate. Draws are the logistics of the drawing die or drawing die used to control the tendons. The drawbead can be a local structure of the mold or adhesive, or it can be embedded in different parts of the mold or adhesive. The cross section of the pressed beam is a special rectangular drawbead. See formwork. The plate is used to connect the modules on the plane and support the stamping material of the plate. The mold is a mold with two or more stations, and the material is sent to one station along with the news itinerary.

High-speed precision punch press stamping process is completed in the process of stamping die. There are two kinds of scrapers. 1. Deep-drawing trimming die, used for cutting round trimming machine, easy to remove waste. 2. I like to waste a fixed length when installing on the machine or die-cutting (tape, reel). The combined die is a universal adjustable stamping module formed by various stamping parts side by side according to geometric elements (straight lines, angles, arcs, holes).