News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

Precautions before the work of the steel frame punch


Release time:

2024-02-04

Author:

Source:

Do you know what matters needing attention before the work of the steel frame punch press? Next, the small series will give you a brief introduction.

Steel Frame PunchDo you know what matters needing attention before work? Next, I will give you a brief introduction.

1Before starting, check whether the main fastening screws are loose, whether the mold is cracked, whether the operating mechanism, automatic parking device, clutch and brake are normal, and whether the lubrication system is blocked or short of oil. If necessary, you can test with an empty car.

22. The opening of the installation mold should open the slider to the bottom dead center, and the closing height must be correct; The mold is firmly fastened for pressure test inspection.

31. Pay attention during work, and it is forbidden to put hands, tools and other objects into the dangerous work area. Small pieces must be analyzed with special management tools (tweezers or feeding mechanism). When the die is stuck in the blank, only tools are allowed to be used to free it.

44. If abnormal operation of press machine or abnormal sound is found, stop feeding and check the cause. If the rotating parts are loose, the operating device is out of order, the mold is loose and defective, it shall be stopped for repair.

ABOTP4opTCy35K72FFZRSQ.jpg

5When each workpiece is washed, hands or feet must leave the button or pedal to prevent misoperation.

62. When operating with more than two persons, special person shall be appointed to drive, and coordination shall be paid attention. Before leaving work, the mold should be left behind, the power supply should be disconnected, and necessary cleaning should be carried out.

The above is a brief introduction to you aboutSteel Frame PunchPrecautions before work, I hope it can be helpful to you.

Zhejiang Yitian Seiko Machinery Co., Ltd. is located in Ningbo. The company was established on July 17, 2018. It has a large and large number of precision CNC machining equipment, various precision testing instruments, and a full set of physical and chemical facilities and other advanced quality control methods. The company's main products areSteel Frame PunchHigh-speed mesh machine, servo feeder, Taiyida punch, high-speed punching machine, Ningbo punch, high-speed gantry punch, high-speed precision punch, feeder, stamping machine, etc. Customers in need are welcome to come and consult.