News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

What is the working principle of high-speed gantry punch? How much is the price of high-speed gantry punch?


Release time:

2024-02-04

Author:

Source:

What is the working principle of high-speed gantry punch? How much is the price of high-speed gantry punch? Let's take a look. The design principle of high-speed gantry punch is to convert circular motion into linear motion. The main motor drives the flywheel, and the clutch drives the gear, crankshaft (or eccentric gear), connecting rod, etc. to realize the linear motion of the slider. The motion from the main motor to the connecting rod is a circular motion.

What is the working principle of high-speed gantry punch? How much is the price of high-speed gantry punch? Let's take a look.

The design principle of high-speed gantry punch is to convert circular motion into linear motion. The main motor drives the flywheel, and the clutch drives the gear, crankshaft (or eccentric gear), connecting rod, etc. to realize the linear motion of the slider. The motion from the main motor to the connecting rod is a circular motion. There is a connection point for circular motion and linear motion between the connecting rod and the slider. There are two mechanisms in the design, one is a ball type, and the other is a pin type (cylindrical type). By means of this mechanism, the circular motion is converted into a linear motion of the slide.

high speed gantry punch how much the price? The high-speed gantry punch can exert economic pressure on the material to produce plastic deformation and obtain the required shape and precision. Therefore, we actively cooperate with a set of dies (split upper die and lower die) to place the material development in between. The machine learning exerts a certain pressure to deform the material. The reaction force caused by the force applied to the material during processing is absorbed by the punch mechanical equipment body.

What is the operation procedure of the punch? How much is the price of the high-speed gantry punch? Let's take a look at it.

1. Punch workers can only operate independently after learning, mastering the structure and performance of the equipment, being familiar with the operation procedures and obtaining the operation permission.

2, the correct use of high-speed punch on the safety protection and control device, shall not be arbitrarily disassembled.

3. When installing the mold, it is necessary to check whether the connection, lubrication and other parts and the protective safety device are normal, and the mold screws are firmly installed and shall not be moved.

4. The machine tool shall be operated for 2-3 minutes before working, and the flexibility of the control devices such as foot brake shall be checked, and it can be used only after it is confirmed to be normal, and it shall not be operated with disease.

5. The upper mold should be firm, the upper and lower molds should be aligned to ensure the correct position, and the machine tool should be moved by hand to test blanking (empty car) to ensure that the mold is in good condition.

6. Pay attention to lubrication before driving, and remove all floating items on the bed surface.

7. During the operation of the punch or during the operation of the punch, the operator should stand properly, keep a certain interval between his hands and head and the punch, and always pay attention to the punch movement. It is strictly prohibited to chat with others.

8. When punching or making short workpieces, special tools shall be used, and direct feeding or taking of parts by hand shall not be allowed.

9. When punching or making long body parts, safety support frame or other safety measures shall be set up to avoid digging injury.

10, single, hands and feet are not allowed to put on the hand, foot brake, rush once to move (step), to prevent accidents.

11, more than two people jointly operate, responsible for moving (stepping) the brake, pay attention to the movement of the feeder, it is strictly prohibited to pick up parts, while moving (stepping) the brake.

12. Stop the car in time at the end of the work, cut off the power supply, wipe the machine tool and tidy up the environment.

What is the speed of the punch? How much is the price of the high-speed gantry punch? Let's take a look at it.

At present, there are two speeds for Taiwan and domestic presses on the market, one is 400 times/minute, and the other is 1000 times/minute. If your product mold requires a speed of 300 times/minute or higher, you should choose a punch with 1000 times/minute. Because the equipment cannot be used to the limit, and the punch press within 400 times/minute generally does not have a mandatory lubrication system, only butter is used for lubrication in the joint part, and the punch structure is of sliding block type, which makes it difficult to guarantee the precision, wears out quickly during long-term work, the precision decreases, the mold is easy to be damaged, the maintenance rate of the machine and the mold is high, and the time is delayed, thus affecting the delivery period.