1. Pay attention to safety
To ensure the locking/unlocking process is done correctly for the safety of service personnel, ensure that the socket is at the very bottom of travel before performing brake maintenance work on the Eccentric Mechanical Power Press Machine. If this is done, there is no need to lock the sleeve anymore.
The metal stamping machine is mainly used for blanking and shaping of various aluminum and magnesium alloy die-casting products, and for trimming of plastic products; it is also suitable for forming plastic materials such as blanking, stretching, embossing, etc.
Nowadays, the quality mechanical speed press machine is widely used and favored by many enterprises. This is because compared with the traditional hairpin mechanical punch, although the principle of the water drop clip high-speed press is basically the same, it makes our stamping industry It officially entered the high-speed and efficient processing field.
The mold of the mechanical speed press machine is processed by the fast wire-feeding method. Compared with the slow wire-feeding method used by the low-speed punch, the processing methods of the fast wire-feeding and the slow-feeding wire are very different.
The working principle of 200T precision press machine The oil pump transports the hydraulic oil to the integrated cartridge valve block, and distributes the hydraulic oil to the upper cavity or lower cavity of the oil cylinder through each check valve and relief valve.