这是描述信息
这是描述信息

ZHEJIANG YITIAN PRECISION MACHINERY CO.,LTD

+86-574-86198812, 86198845

language
中国
韩国
韩国
韩国
韩国
韩国

News Center

What tests should be done before the operation of the precision press machine

2022-11-24 11:50

In order for the precision press machine to operate normally, the preparatory work before and after the mechanical operation must be done well. The following is an introduction to the preparatory work for the precision press machine:

precision press machine
1. An idling test run is required before the official operation, and the four-column press can only be operated after confirming that all parts of the press are normal. Unnecessary items on the precision press machine table should be cleaned up before starting the machine, and be careful not to injure people due to driving vibration or hit the switch to cause the slider to start suddenly.
2. Before starting the equipment, check whether the clutch and brake of the precision press machine are in a valid state, whether the protective equipment is complete and easy to use, and whether all parts of the crank slider mechanism are abnormal. When problems are found, measures should be taken immediately. It is not allowed to work while sick, and it is forbidden to disassemble and damage the equipment.
3. When adjusting the position of the workpiece in the die mouth area or removing the workpiece stuck in the mold, the feet must be separated from the pedal. During operation, it is forbidden to directly reach into the mold mouth to take objects with hands, and hands must not be placed on the mold.
4. When overhauling and adjusting the precision press machine and when installing, adjusting, and disassembling the mold, it should be carried out when the machine tool is disconnected from power (such as electricity, gas, liquid) and the machine tool is blocked from working, and add a Place blocks for firm support. A warning sign is posted at the start switch of the machine tool.
5. In case of a sudden power failure or after the operation, the power of the precision press machine should be turned off, and the application should be restored to the neutral position of the clutch, and the brake should be in the braking state.

Copyright © 2019 Zhejiang Yitian Precision Machinery Co., Ltd.

All rights reserved.浙ICP备19009580号 Powered by www.300.cn

这是描述信息

+86-574-86198823, 86198812

Copyright © 2019 Zhejiang Yitian  Precision Machinery Co., Ltd.

浙ICP备19009580号 Powered by www.300.cn