这是描述信息
这是描述信息

ZHEJIANG YITIAN PRECISION MACHINERY CO.,LTD

+86-574-86198812, 86198845

language
中国
韩国
韩国
韩国
韩国
韩国

News Center

The applicable scope and technical regulations of SINGLE-CRANK PRECISION PRESS

2021-10-07 10:44

The scope of application of SINGLE-CRANK PRECISION PRESS: It is widely used in the manufacturing and component assembly of household appliances, electronics industry, electrical terminals, watch industry, cameras, micro motors, etc. It is suitable for pressing, forming, assembling, riveting, and Printing, punching, cutting, bending, printing and other work requirements. The structure is sturdy, improves production efficiency, and is easy to operate, flexible in action, and durable.

SINGLE-CRANK PRECISION PRESS

Technical regulations of SINGLE-CRANK PRECISION PRESS:
   1. Only those who have passed the examination and hold an equipment operation certificate are allowed to operate SINGLE-CRANK PRECISION PRESS. The operator must strictly abide by the relevant safety, shift shift and other systems.
  2. Before work, the oil should be filled strictly in accordance with the lubrication regulations, and the amount of oil should be kept appropriate. The oil path is unblocked, the oil mark (window) is eye-catching, and the oil cup, oil line, and linoleum are clean.
   3. Check whether the equipment fasteners are loose and whether the safety protection devices are in good condition. Check whether the mold is cracked and whether it is firmly fixed.
  4. Check whether the starting mechanism and brake are sensitive, and whether the slider can be stopped immediately.
  5. Turn the flywheel by hand to check the stroke of the punch and the gap between the molds to prevent "die gnawing" or damage to the machine tool when driving.
   6. Start the motor and wait for the aircraft to rotate normally before manipulating the landslide.
  7. When installing the mold, the slider must be placed to the bottom dead center, so that the closed height of the mold is smaller than the small closed height of the machine tool.
   8. When working, always pay attention to whether the clutch and brake mechanism are normal; whether the connecting rod nut is loosened, whether the position of the upper and lower molds is changed, and stop immediately if there is a problem. .
   9. After finishing one punch, hands or feet must leave the button or pedal. When two or more people operate, pay attention to coordination and cooperation.
  10. If abnormal sound is found, the sliding block has double-strike phenomenon, the stamping part is bitten on the mold, etc., it is necessary to stop and check immediately.
  11. Workpieces, tools and sundries are not allowed to be placed on the workbench.
12. After SINGLE-CRANK PRECISION PRESS work, the equipment must be inspected and cleaned, daily maintenance work must be done, and the operating handles (switches) must be placed in neutral (zero position), and the power switch must be opened to achieve orderliness, cleanliness, lubrication, Safety.
 

Copyright © 2019 Zhejiang Yitian Precision Machinery Co., Ltd.

All rights reserved.浙ICP备19009580号 Powered by www.300.cn

这是描述信息

+86-574-86198823, 86198812

Copyright © 2019 Zhejiang Yitian  Precision Machinery Co., Ltd.

浙ICP备19009580号 Powered by www.300.cn