In order for the precision press machine to operate normally, the preparatory work before and after the mechanical operation must be done well. The following is an introduction to the preparatory work for the precision press machine:
The metal stamping machine consists of two parts, the mainframe and the control unit. The main engine part includes the frame, the main cylinder, the ejector cylinder and the liquid filling equipment, etc.
Punch press operation is a dangerous job, especially the performance and operation of each punch press are different. Therefore, before actually operating the punch press, the operator must read the punch press manual carefully and strictly follow the requirements of the manual.
Most of the hydraulic stations of precision four-guide column punch components are closed-loop control systems, which must meet the needs of the stability, response time and accuracy of the hydraulic press system.