
ZHEJIANG YITIAN PRECISION MACHINERY CO.,LTD
News Center
Precautions for maintenance of precision press machine
The precision press machine needs to be maintained and maintained during use, so that the equipment can be used for a longer time. But maintenance needs to pay attention to methods, improper operation will cause damage to the equipment, so it is recommended that you pay attention to the following points when maintaining the precision press machine.
1. Carry out lubrication maintenance according to the lubrication requirements of the precision press machine. It is strictly forbidden for non-operators to operate the equipment, and it should be stopped when people leave the machine. The oil filter net on the oil suction pipe must be cleaned or washed regularly.
2. Regularly check whether the handles, knobs and buttons are damaged. Always pay attention to whether the temperature and sound of the operating parts of the precision press machine are normal.
3. The precision press machine must be kept clean, and the air inlet net cover of the motor must be kept in a good ventilated state and not blocked.
4. It is necessary to add lubricating oil to the precision press machine and scrub the machine tool to keep it clean. After the press has cleaned the stock solution system, it needs to be debugged item by item.
5. When cleaning the oil pipe of the precision press machine, avoid dirt and other impurities such as cotton yarn and mix it into the pipe. Turbine oil with a temperature of 38 degrees Celsius is usually used as a cleaning agent. If the oil temperature rises to 50 to 80 degrees Celsius, the cleaning effect will be very good.
6. When cleaning the main system of the precision press machine, a temporary oil filter should be installed on the return pipe of the main circuit to filter out impurities in the main system.
7. The main system of the precision press machine is clean, oil-free and alcohol is used as a cleaning agent to avoid corrosion of hydraulic components.
8. After the precision press machine is cleaned, all organizations should return to their original positions, clean up the oil tank, and add new hydraulic oil in the equipment operation manual.
9. Start the precision press machine hydraulic pump, check whether the hydraulic pump works well, whether the sealing parts and pipelines are blocked or leaked, check whether the limit switch works well, and whether the bumper positioning is normal.
The above is the introduction of precision press machine maintenance items, I hope it will be helpful to everyone. If you need to buy, you can get in touch with us, we will serve you wholeheartedly and look forward to your visit.
Copyright © 2019 Zhejiang Yitian Precision Machinery Co., Ltd.
All rights reserved.浙ICP备19009580号 Powered by www.300.cn

Copyright © 2019 Zhejiang Yitian Precision Machinery Co., Ltd.