这是描述信息
这是描述信息

ZHEJIANG YITIAN PRECISION MACHINERY CO.,LTD

+86-574-86198812, 86198845

language
中国
韩国
韩国
韩国
韩国
韩国

News Center

How to use metal stamping machine

2023-02-09 10:41

The metal stamping machine is mainly used for blanking and shaping of various aluminum and magnesium alloy die-casting products, and for trimming of plastic products; it is also suitable for forming plastic materials such as blanking, stretching, embossing, etc. Various uses such as pressing of powder products. The following is an introduction to the application method of metal stamping machine.

metal stamping machine

1. This machine uses about 50 liters of No. 46 anti-wear hydraulic oil. External three-phase four-wire AC380V power supply, it is forbidden to use the machine without a ground wire.
 
2. Turn on the power switch, the power indicator light is on
 
3. Confirm the running direction of the motor:
 
4. The metal stamping machine has two modes of operation: manual/automatic:
 
a. Manual: Turn on the power switch, turn the selector switch to the manual position, press the manual down button, and the oil cylinder goes down quickly. After letting go, the oil cylinder stops to realize jog operation. This operation method can test the pressure of the product.
 
B, Automatic: Turn on the power switch, turn the selection switch to the automatic position, press the start button with both hands at the same time, the oil cylinder drives the movable working plate to go down quickly, press down to touch the travel switch, the oil cylinder drives the movable working plate to rise up, the oil cylinder stops, and the one-week action is completed .
 

Copyright © 2019 Zhejiang Yitian Precision Machinery Co., Ltd.

All rights reserved.浙ICP备19009580号 Powered by www.300.cn

这是描述信息

+86-574-86198823, 86198812

Copyright © 2019 Zhejiang Yitian  Precision Machinery Co., Ltd.

浙ICP备19009580号 Powered by www.300.cn