How to properly maintain the 200T precision press machine

The 200T precision press machine body is made of high-strength steel and special welding skills, with good rigidity and long service life. The moving parts are all combined with joint bearings, which are easy to be smooth. The working oil is degraded due to the entry of dirt. It is necessary to change the oil regularly. Always check whether each joint of the hydraulic press is leaking oil, and check the oil quality regularly. It cannot be a sensation! This is the personal experience I have summed up from years of contact with the four-column press equipment. Those who do this can try to protect it according to such a key, and enter the air solution to remove and eliminate some of the most important precision parts in the system Install.

The maintenance method of 200T precision press machine is as follows:

1. Lubricate and maintain according to the lubrication requirements of the machine.

2. After the machine tool works for one year, the fuel tank should be cleaned.

3. It is strictly forbidden to operate by non-operators, and people must leave the machine and stop.

4. Refill the hydraulic oil, and the amount of oil should be determined at 3/4 of the height of the oil mark.

5. Regularly check whether the handle, knob and button are damaged.

6. The oil filter net on the oil suction pipe must be cleaned or washed regularly.

7. The motor must be kept clean, and the air inlet mesh cover of the motor must be kept ventilated frequently and cannot be blocked.

8. After get off work every day, lubricate and scrub the 200T precision press machine.