这是描述信息
这是描述信息

ZHEJIANG YITIAN PRECISION MACHINERY CO.,LTD

+86-574-86198812, 86198845

language
中国
韩国
韩国
韩国
韩国
韩国

News Center

How does China SINGLE-CRANK PRECISION PRESS work

2022-03-11 14:53

The upper die of China SINGLE-CRANK PRECISION PRESS is the upper part of the whole set, which is installed on the die part of the slider. The upper die seat is the upper plate part of the upper die. The workpiece and the pressing block are connected together and fixed with the pressing block slider. The lower die is the next part of the set and is mounted on the table of the press. The formwork is the lower surface of the lower formwork, which is directly fixed on the workbench or on the flat plate. Trim is the sidewall of the die edge. The bevel angle of the cutting edge is the punching die hole for each bevel. The air cushion is the top device that uses the compressed air of the high-speed punch press as the main power.

China SINGLE-CRANK PRECISION PRESS

China SINGLE-CRANK PRECISION PRESS guide sleeve is a precise guide device for the relative movement of the upper and lower molds of tubular parts. It is necessary to ensure that the punch and die are aligned, guided and unloaded (parts) for a precise sliding fit of the plate-like part within the punch. The guide column is a cylindrical part, which provides precise guidance for the relative movement of the upper and lower molds. Most of them are fixed on the lower mold seat and cooperate with the guide sleeve of the upper mold seat. The guide pin is guided to the pin-shaped portion of the female mold position in the material hole. This guide rail is used to guide the mold of the mold, and guide the stamping mold when it is used. The guide plate guide part of the guide plate (belt and roller) is a die. The column sleeve is a guide rod, and the guide sleeve is arranged between the sliding dies.

The stamping die of China SINGLE-CRANK PRECISION PRESS is installed in the stamping process of the press and the production process of the equipment accessories, and consists of upper and lower parts. The punch is a convex workpiece and passes directly through the punching hole. The die is a concave working part formed directly by punching and punching. The spare parts protection plate is a plate that prevents fingers or foreign objects from entering the dangerous area of ​​the stamping die. Binder (ring) is the overflow component of stamping material or the process control material of stamping dies and is the most well-known adhesive in stretch dies and platens. Drawbeads are the flow of drawing dies or dies used to control bead protrusions. Drawbeads can be local structures of the mold or adhesive, or they can be embedded in different parts of the mold or adhesive. The cross section of the compression beam is a special rectangular drawbead. See formwork. Plates are used to connect modules on a flat surface and support the stamped material of the plates. The mold is a mold with two or more stations, and the material is sent to one station along with the news itinerary.

China SINGLE-CRANK PRECISION PRESS stamping process in the process of finishing the stamping die. There are two types of scrapers. 1. Deep-drawing and trimming die, used for cutting round and trimming machine, which is convenient to remove waste. 2. Like to waste fixed lengths when installing on machines or die cutting (tape, reel). Combination punching die is a universal adjustable punching module which is gradually formed by various stamping parts side by side according to geometric elements (straight line, angle, arc, hole).
 

Copyright © 2019 Zhejiang Yitian Precision Machinery Co., Ltd.

All rights reserved.浙ICP备19009580号 Powered by www.300.cn

这是描述信息

+86-574-86198823, 86198812

Copyright © 2019 Zhejiang Yitian  Precision Machinery Co., Ltd.

浙ICP备19009580号 Powered by www.300.cn