Advantages of precision four-guide column punch products

1. High efficiency and energy saving.
There is no clutch friction energy consumption, no flywheel idling energy consumption, and the high efficiency of the motor itself, making the precision four-guide column punch highly efficient and energy-saving.

2. Intelligent automatic numerical control.
The operation of precision four-guide column punch is controlled by high-speed computer intelligence, which can be fully automated without manual operation.
3. High mold life.
The pressure is numerically controlled, and the mold will not be overloaded, worn and damaged.
4. The product is precisely formed, with small tolerance and high precision.
The pressure is stable and the wear is reduced, and the mold wear is reduced. The products are precisely formed under the precise numerical control. The forgings have few flashes, small tolerances, and high precision. The tooth profile of the bevel gear can be directly formed and produced.
5. The equipment has high reliability.
The precision four-guide column punch has no wearing parts, and the motor rotor has neither windings nor conductors, and no permanent magnets. It is stronger than permanent magnet servo motors, sturdy and reliable, and resistant to impact. The maintenance-free equipment effectively saves maintenance personnel and maintenance hours.
6. Intelligent mode adjustment.
The fuselage is equipped with a tonnage meter, which can be used to lower the mold and try out under pressure control. When the mold is adjusted at a slow speed and the mold is matched at a close distance, there is no need to set up special mold adjustment and test equipment and personnel, which saves mold adjustment labor and man-hours.
7. Information management.
Real-time numerical control of process parameters, and real-time feedback from the communication network, realizes the information-based control of product quality and the traceability of product quality.
8. Resource saving and environment friendly.
There is no need for permanent magnet rare earth materials, which saves rare and precious resources and avoids the damage to the environment caused by rare earth mining.
9. The human-machine interface has good interaction.
The motor is digitally controlled, and the user can input simple displacement and speed parameters to realize intelligent and flexible process curve numerical control. The user does not need to compile the process curve, which is extremely convenient to use.
10. The precision four-guide column punch structure is extremely simple, the motor-reduction mechanism-brake-working mechanism, and the cost is low.