News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

Solutions to Common Problems of Feeder and Development Questions


Release time:

2024-02-04

Author:

Source:

In the cold stamping processing industries such as hardware, auto parts, metal furniture, and kitchen equipment, the common problems and solutions of the punch feeder are becoming more and more extensive, but the size and punching effect of the feeder are different, and the feeder The choice and feeding method of the machine are also different.

    In the cold stamping processing industries such as hardware, auto parts, metal furniture, and kitchen equipment, the common problems and solutions of the punch feeder are becoming more and more extensive, but the size and punching effect of the feeder are different, and the feeder The choice and feeding method of the machine are also different.

    In general, in the process of using the feeder, we will inevitably encounter some small problems, in this case, we need to use the correct method to solve. How to deal with the deviation of the punch feeder? Punch feeder Solution: Check whether the feeder mold and the feeder mounting plate are complete.90°Vertical angle; check the alignment of materials when feeding. Re-calibrate the feed lever.

1599633986636.jpg

   When the feeder mold positioning pin enters the 1/3 of the hole position, the auxiliary alignment is released by the release device. What should I do if the paper feed of the punch feeder is unstable? Solution: Check whether there is a problem with the mold. In the case of continuous normal stamping of the feeder, check whether the air pressure reaches0.45kgf/cm3. Check that the release time is correct. Check whether the motor is normal.

    Four thoughts on the development of feeder: reducing energy consumption and saving energy has become an important aspect of medical research in the field of transportation technology. Energy consumption per kilometer per ton of materials has been used as one of the important indicators for feeder selection. Reduce the exhaust gas noise generated during the operation of various feeders.

    And we should expand the use of feeder. Can transport radioactive, flammable high temperature, explosive, viscous materials. The structure of the feeder meets the requirements of automatic control of a single material conveying system. For example, the pusher used by the post office for automatic parcel sorting should be able to meet the requirements of the sorting action.

    Machinery industry analysts believe that although my country has become the world's largest feeder market, the most open chiller and the largest exporter of small-tonnage feeders, the competitiveness of super-tonnage feeders is still insufficient, and CNC feeders, Three-in-one feeders and clip-on feeders are still obstacles to development. High-speed and high-precision technological breakthroughs are what we should do, but they are more based on large domestic enterprises with strong technical strength, because they have advantages, their products are technology-oriented, and small and medium-sized enterprises lack technical precipitation and financial support.

    Therefore, the development of the feeder is still relatively backward, and we need to continue our efforts. Strive for the use of existing technology to achieve a more perfect feeder technology.