News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

How to deal with the feeder if the system alarms? How expensive is the feeder?


Release time:

2024-02-04

Author:

Source:

With the continuous change of industrial structure, more and more enterprises begin to change the traditional production mode, in order to transform and develop. In the stamping industry, more and more companies have begun to adopt automated stamping production, which has changed the traditional manual feeding mode, making the punch feeder very common in the stamping industry.

  Feeder PriceWith the continuous change of industrial structure, more and more enterprises begin to change the traditional mode of production in order to transform and develop. In the stamping industry, more and more companies have begun to adopt automated stamping production, which has changed the traditional manual feeding mode, making the punch feeder very common in the stamping industry. As a commonly used machine punch feeder, it will more or less fail in daily use. How to deal with the feeder if the system alarms? How to repair the related faults? How expensive is the feeder?

First, we need to find out the cause of the feeder system alarm, and then solve it. How expensive is the feeder? Generally speaking, the alarm of the feeder is mainly caused by the following reasons:

1. feeder has irregular error.

Solution:

1. Whether the feeding mechanism used is pneumatic loose, if so, check whether the pressure of the air compressor is normal.

2. Check whether the pressure of the pressure plate is uniform, if it is not uniform, adjust the pressure of the release device.

Check whether the coil delivered by the rack is on the same level as the feeder and the mold.

2. press release is not stable.

Solution:

1. Check whether there is an internal guide pin in the mold, carefully check whether there is any problem, and eliminate it in time.

2. Check whether the direction of the feeder is displaced, and then check whether the conveying direction is correct and whether the die is abnormal.

3. Check whether the eccentric shaft and loose shaft of the punching machine are stuck due to oil leakage. Lubricate with kerosene and butter.

Feeding position deviation of 3. feeder

Processing method:

1. When the mold positioning pin enters the 1/3 position of the material hole, use the release device to release the auxiliary centering.

2. Check whether the mold and the feeder mounting plate form a 90 vertical angle.

3. Check whether the materials are aligned when feeding;

4. Recalibrate the feed roller;

Feeder alarm for many reasons. In the process of inspection, one by one inspection, and then maintenance. During use, attention should also be paid to the maintenance of the feeder to avoid failure. If the above method does not solve the problem, please contact the feeder manufacturer for repair or replacement parts.

  Feeder PriceHow expensive? We should check the maintenance of the feeder regularly.

1. Whether there is any foreign matter between the roller and the gear, if there is any foreign matter, remove it in time.

2. Whether the timer is normal, whether the external wiring is deformed, damaged, leakage or short circuit.

3. Whether there is leakage in the air pressure supply system.

4. Pay attention to whether the oil pressure and pressure gauge indicate normal, and whether the pressure indicated by the pressure gauge is within the normal range.

5. Whether the feeding roller has good parallelism, and whether the parts are damaged, deformed, abnormal sound or other abnormal shapes. All parts of the machine are in good condition.

6. Whether the switch and display light on the operation panel are abnormal, and there must be no foreign matter on the man-machine interface.

7. Whether the screws and nuts combined between the institutions are loose and the interface connection is correct, loosening will seriously affect the operation of the machine.

The maintenance of the feeder is a long-term work that needs to be implemented in every detail. Doing a good job in the maintenance of the feeder can reduce the occurrence of unnecessary feeder failures, reduce the damage rate of machine failures, and also provide a guarantee for the safety of the factory.