News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

Manufacturing Method of Servo Feeder


Release time:

2024-02-04

Author:

Source:

The servo feeder is a tool device that helps people reduce the difficulty or effort of work, and is characterized by a combination of artificial physical components. There is correct relative movement between the various parts of the machine, and the supplier is one of the machine equipment. Below to understand the production method of servo feeder.

  Servo feederIt is a tool device that helps people reduce the difficulty or effort of work, characterized by a combination of artificial physical components. There is correct relative movement between the various parts of the machine, and the supplier is one of the machine equipment. Below to understand the production method of servo feeder.

Implementation elements of servo feeder:

The servo feeder is to provide a supplier with the advantage of automatic detection, which solves the problem that the existing supplier does not install an inspection device on the conveyor belt, resulting in the decline of the transported items after the conveyor belt breaks.

The servo feeder includes a conveyor machine of a support member, and the middle fixing member at the bottom of the inner cavity of a support member is connected with a storage battery. A sleeve is fixed around the bottom of a support. The top of the inner cavity of the sleeve is connected to the support leg by spring activity, and the bottom of the support leg is connected to the roller activity, which is connected to the middle end of the right side of the outer surface of a support. The left and right ends of the top of a support are fixed by electric telescopic rods. The top of an electric telescopic rod is fixedly connected with a fixed frame, the left end of the top of the fixed frame is provided with a supply port, the right front and rear sides of the outer surface of the fixed frame are fixed with support rods, the inner hole of the support member is movable to install the right roller through the hinge, and the upper left of the fixed frame is fixed with the motor. The output shaft of the motor is connected to the fixed left roller through a hinge. The left roller and the right roller are connected by a transmission belt. The left end of the inner cavity of the rigid frame is fixedly connected with a second support. The lower part of the two supports is fixedly connected with a pressure sensor, the lower part of the pressure sensor is fixedly connected with a connecting rod, the lower part of the connecting rod is movably provided with a tensioner, and the outer surface of the tensioner is connected to the inner surface of the conveyor belt for transmission. The inner chamber of the cage is fixedly connected with a third support, and the end of the three supports near the inner surface of the fixed frame is fixed with a second electric telescopic rod. The top and bottom fixed connections of the outer surface of the second electric telescopic lever have top and bottom connecting plates respectively.

Compared with the existing technology, the servo feeder has the following beneficial effects

1. By fixedly connecting the pressure sensor to the bottom of the second support, through the action of the second electric telescopic plate, the upper connecting plate, and the lower connecting plate, when the conveyor belt breaks, the pressure sensor automatically turns on the second electric telescopic strip Power supply, and clamp the conveyor belt by immediately shrinking the upper connecting plate and the lower connecting plate. Existing conveyors have been solved because there is no detection device on the conveyor belt.

2. A spring is installed between the sleeve and the leg to absorb the impact, which ensures the stability of the feeder during movement and use, and improves the service life. At the same time, the left and right ends of the support top are fixed with electric stretching, which has the ability to adjust the height of the feeder, which is convenient for people to use.