News Center

Promote the sustainable development of enterprises by technological innovation and expanding industry applications

What is the price of the feeder? How do we deal with the unstable feeding speed of the feeder?


Release time:

2024-02-04

Author:

Source:

How should we deal with the unstable feeding speed of the feeder? What is the price of the feeder? The feeder is mostly used for the auxiliary work of the punch, so that the strip is transported to the stamping area of the punch, and the stamping forming step is completed, which is an important step to realize the automatic production of the punch. The use of the punch feeder has changed the high-risk mode of traditional manual feeding to a certain extent and improved the production efficiency.

How do we deal with the unstable feeding speed of the feeder?Feeder PriceWhat's it like?

The feeder is mostly used for the auxiliary work of the punch, so that the strip is transported to the stamping area of the punch, and the stamping forming step is completed, which is an important step to realize the automatic production of the punch. The use of the punch feeder has changed the high-risk mode of traditional manual feeding to a certain extent and improved the production efficiency. Some people may ask that during the use of the feeder, the feeding comfort and instability will occur.Feeder PriceHow is it? In view of this situation, what method can be quickly solved? For everyone to summarize the effective method:

1. Excessive or insufficient external air supply pressure. In order to achieve fast and stable relaxation of the feeder, a stable air source is required, and its three-point combined pressure gauge should be adjusted to 4.5kg/cm2. Treatment method: check whether the three-point combination pressure gauge is damaged and adjust the compressor pressure.

2. There is stamping oil on the feed roller. In stamping production, in order to prevent damage to the mold life and inaccurate stamping accuracy due to long-term friction between the material and the mold, stamping oil is usually applied to the material before it enters the mold. If the stamping oil enters between the feed rollers, the feed slip will be inaccurate. At this time, the paper feed roller may be cleaned and wiped.

3. Incorrect feed height. Punches are often used with different die sets, and the height of the different dies can be different. At this time, after the mold is replaced, the feeding height of the feeder needs to be adjusted. If the adjustment is not correct, the feed will be skewed and uneven. Treatment method: Adjust the feeding height of the feeder to keep it horizontal and vertical to the mold.

4. The setting speed is too fast. Due to the limitation of the response time of the electronic control system, high-speed feed cannot be carried out. Under normal circumstances, the large pneumatic feeding speed is 60-120 times per minute (the specific number depends on the material thickness and step distance), and the large mechanical feeding speed is 150-200 times per minute. If the actual stamping speed is higher than this speed, it will lead to leakage and wrong material.

5. The die itself has errors or no trimming blocks. If there is a problem with the design and manufacture of the die itself, the feed distance will be unstable. At this time, you can try to press the product by manual feeding to confirm whether the problem lies in the mold itself, not the feeding. If this is the case, you can change the mold to correct it.

6. Incorrect feed time setting. Different molds have different requirements for the feeding time of the feeder. If the feeding time is set too late, it will cause insufficient feeding. At this time, it is necessary to readjust the feed signal cam angle of the punch.

If you want to know more about the feeder andFeeder PriceRelated questions can contact us. We are a feeder manufacturer and can introduce more relevant contents to you.